pelanetilmu.blogspot .com: September 2009

m miftahul huda

1. Apa itu WiFi ?
2. Apa itu D~NET WiFi ?
3. Dimana saja lokasi D~NET WiFi Zone ?
4. Berapa kecepatan koneksi D~NET WiFi ?
5. Ada berapa macam layanan D~NET WiFi ?
6. Apa spesifikasi minimum perangkat WiFi yang dibutuhkan?
7. Apakah layanan D~NET WiFi membutuhkan software khusus ?
8. Bagaimana saya tahu bahwa saya berada dalam area D~NET WiFi Zone?
9. Bagaimana caranya untuk terhubung dengan koneksi D~NET WiFi ?

1. Apa itu WiFi ?
WiFi adalah singkatan dari Wireless Fidelity, suatu rangkaian produk yang didesain untuk penggunaan teknologi Wireless Local Area Networks (WLAN) berdasarkan standar spesifikasi IEEE802.11.

2. Apa itu D~NET WiFi ?
D~NET WiFi merupakan salah satu layanan yang disediakan D~NET, dimana dengan menggunakan layanan ini, Pelanggan dapat menikmati akses Internet nirkabel (wireless) melalui perangkat yang telah dilengkapi dengan teknologi Wi-Fi di lokasi-lokasi yang berada dalam jangkauan D~NET WiFi Zone.

3. Dimana saja lokasi D~NET WiFi Zone?
Saat ini, layanan D~NET WiFi Zone dapat Anda nikmati di beberapa lokasi sebagai berikut:

SURABAYA

MAL
• Plasa Tunjungan 3
- Cafe Excelso

• Plasa Tunjungan 4
- De Excelso Café
- Dome Café
- Bentoya Resto
- Celebrity Fitness

• Supermal
- Restaurant area
- Dome Café
- De Excelso Café
- DePlaats

• Pakuwon Trade Center
- Café Excelso
- Food Court Studio
- Bentoya

• Surabaya Town Square (SUTOS)
- Café Excelso

HOTEL, RESORT & APARTEMENT
• Apartement Puri darmo
• Apartement Metropolis
• Apartement Puncak Marina
• Apartement Graha Family
• MEX Building (Lt. 1,3,7)
• Singgasana Hotel Surabaya
• Hotel Surya Tretes Pandaan
• Tretes Raya Hotel Pandaan
• Graha Residen
- Cinnamon Chinese Restaurant
- The Edge Cafe
• GWALK
- Le Jardin
- Panda Kitchen,
- de Pool,
- CQ café

OFFICE BUILDING
• Graha SA (Lantai 5, 6 dan Lobbi)
• RS.Husada Utama
• Wisma Bii

RESTAURANT/CAFÉ
• Library Cafe @ Gramedia Expo

PUBLIC SERVICE AREA
• Taman Surya
• Gramedia Expo

MALANG
MAL
• Plaza Araya
- Cafe Excelso

BALI
HOTEL, RESORT & APARTEMENT
• Goodway Hotel Nusa Dua

4. Berapa kecepatan koneksi D~NET WiFi?
Kecepatan koneksi D~NET WiFi maksimum 64 Kbps, baik untuk upload dan download per user.

5. Ada berapa macam layanan D~NET WiFi?
Layanan D~NET WiFi dapat diperoleh baik untuk Pelanggan dan Non-Pelanggan D~NET.

• Pelanggan D~NET
Pelanggan D~NET dapat menggunakan account layanan Dial-Up untuk terhubung dengan layanan D~NET WiFi.
Harga: Rp. 50,-/menit atau Rp. 600,-/MB (harga belum termasuk PPN)
Untuk informasi lebih lengkap dapat dilihat mengenai

• Non Pelanggan D~NET
D~NET menyediakan Voucher WiFi, sebuah kartu prabayar, yang dijual di lokasi-lokasi yang termasuk dalam area D~NET WiFi Zone untuk semua non pelanggan D~NET.
Harga Voucher WiFi (harga sudah termasuk PPN)
- Rp 20.000
- Rp 50.000
- Rp 100.000

Voucher WiFi dapat digunakan untuk layanan Dial-Up dan WiFi dengan tarif :

Akses	Tarif	Keterangan
Dial Up	Rp 50 / menit	Di luar pulsa telepon
WiFi	Rp 100 / menit

6. Apa spesifikasi minimum perangkat WiFi yang dibutuhkan?
Laptop atau tablet PC
- Windows 95, 98, 2000, ME and XP (windows XP recommended)
- Microsoft Internet Explorer or Compatible Browser
- Wireless 802.11b compatible equipments
* Wireless PCMCIA card with Type II PCMCIA slot
* built-in 802.11b capabilities (usually for Centrino Laptop)

PDA
- Windows CE, Palm OS 5.0 or above
- Microsoft Internet Explorer or Netscape Navigator
- Wireless 802.11b compatible equipments
* Wireless PCMCIA card with Type II PCMCIA slot
* built-in 802.11b capabilities (usually for Centrino Laptop)

7. Apakah layanan D~NET WiFi membutuhkan software khusus ?
Layanan D~NET WiFi tidak membutuhkan software khusus.
Anda hanya perlu melakukan install driver untuk penggunaan WiFi card bila notebook Anda tidak didukung dengan fasilitas built-in WiFi card.

8. Bagaimana saya tahu bahwa saya berada dalam area D~NET WiFi Zone ?
- Aktifkan features WiFi di perangkat Anda.
- Klik "Start", klik "Connect to" dan pilih "view all wireless connection"
- Pilih D~NET_WiFi_Zone, klik "connect"
Selanjutnya, coba untuk browsing ke website D~NET (www.sby.dnet.net.id) , bila browsing sukses, maka Anda sudah berada dalam area D~NET WiFi Zone.

9. Bagaimana caranya untuk terhubung dengan koneksi D~NET WiFi ?
Bila Anda sudah terhubung ke D~NET WiFi Zone, Anda bisa langsung ke langkah 4. 1. Pastikan features WiFi sudah di aktifkan pada perangkat Anda.
2. Klik "Start", klik "Connect to" dan pilih "view all wireless connection"
3. Pilih D~NET_WiFi_Zone, klik "connect"
4. Buka browser dan ketik http://hotspot.sby.dnet.net.id
5. Pop Up window D~NET WiFi akan terbuka. Masukkan username dan password Anda.
6. Pop Up window akan menunjukkan status dan waktu koneksi Anda
7. Untuk mengakhiri koneksi internet, klik pada tombol logout di pop up window.

*Panduan di atas adalah untuk Laptop/Notebook, untuk informasi lebih lanjut, silakan menghubungi Technical Support kami di no.telpon 548 0 500 ( 24 jam ) READMORE

0 komentar |

TUTORIAL ADSL(SPEEDY)

m miftahul huda

Pasang Speedy

untuk pemasangan speedy Perangkat yang diperlukan pelanggan :

1. Modem ADSL

2. Splitter / Micro filter

3. PC(Personal Computer) atau Notebook

. 500MHz processor, 128 MB RAM dan dilengkapi aplikasi multimedia dan ethernet card/ metwork interface card (NIC).

. Sistem operasi Windows ME/2000/XP, Linux, Mac OS, Solaris.

4. Aksesoris LAN, seperti hub, switch, router bagi pelanggan korporasi bila akan

digunakan

untuk jaringan komputer lokal.

Setting_Modem_Speedy

Adsl Modem SMC

Default IP: 192.168.2.1

Default password: smcadmin

Setting Bridge

1. Click WAN

2. Clik ATM PVC

3. Click VC1

4. Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10

5. Click Save Settings
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg2DAREqlBBYjhoH2t_CLJ6dIgR9-YDtI9hyBsdt7vIINXAOxqCamo4gyjQj-8Ir1Rm-0bnKoPKuoeEU7p1XAMIguTOkPJFTHtnzTR0BCPzzhAF64bMvokWndCwGwyKJItxn-EvSuwLJiCa/s1600-h/image002.jpg
Setting PPPoE

1. Click WAN

2. Click ATM PVC

3. Click VC1

4. Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: (nmrspeedy@telkom.net), Password: (password From Provider), Confirm Password: , MTU: 1492

5. Save Settings

—-
Adsl Modem ZyXeL

P-660R

Default IP: 192.168.1.1
Default username : admin
Default password : 1234

Setting Bridge
1. choose Network
2. choose WAN
3. Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
4. choose Maintenance
5. choose Tools
6. Restart

Setting PPPoE
1. choose Network
2. choose WAN
3. Mode: Routing, Encapsulation: PPPoE, Username: (nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
4. click Maintenance
5. click Tools
6. Restart
—
Adsl Modem Shiro

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Click Advanced
2. Click WAN
3. Click New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
5. Save Settings
6. Restart Router
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjUWgi1xRCZOLTvtqWtTri3-Gz4GkaTqumC1EpitZZikxDv28QrYkyJ9dVVu8z7hueRptElqWW5WRxyMjETcli-uO8MDDF8yynrkHPxJrk3NchpA6WHzzzbyWgignwXiICTEbkz3pXYzbwL/s400/image002.jpg
Setting PPPoE
1. Pilih Advanced
2. Pilih WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: (nmrspeedy@telkom.net), Password: (password from provider), VPI: 8, VCI: 81, and Submit
5. Save Settings
6. Restart Router
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiFQAYs4Vwh6Vm_ubLwIwUDJ63cqgrcQx0yzEaLGPd5ILR7Gb4xWVLfldKKWp35GzV23S-h8ob0pHH9R1aIgFbAzoW551zb-dvDS-OrdOLqqIkxLRv1xS6_ly4yL_qzmhvJNFf5Nz705yLB/s400/image001.png
—
Adsl Modem Aztech

Aztech

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Click Advanced
2. Click WAN
3. Click New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
5. Save Settings
6. Restart Router

Setting PPPoE/Router
1. Click Advanced
2. Click WAN
3. Click New Connection
4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: (nmrspeedy@telkom.net), Password: (password from provider), VPI: 8, VCI: 81, and Submit.
5. Save Settings
6. Restart Router
—
Adsl Modem TECOM

AR1031

Default ip: 192.168.1.1

Default username : admin

Default password : admin

Setting Bridge

1. Click Advanced Setup

2. Click WAN

3. Click Edit

4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next

5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next

6. Cheklist Enable Bridge Service, Service Name: Speedy, Next

7. WAN Setup - Summary, Save

8. Save/Reboot
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi8pVOdbcTUfgp5sHQXvsUvTMVT0ITzVd0Z9rV5XvNhSPpFjmK06iNyvxJVIvEvU4OXvNdmgSsPtCzAdq270IpdEJyk6iMY3YTpBzmlrGTnnMJNZYI0XfRyqfDtNDyc65nhzjKebYthqB8R/s320/image002.jpg
Setting PPPoE

1. Click Advanced Setup

2. Click WAN

3. Click Edit

4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next

5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next

6. Put your PPP Username: (nmrspeedy@telkom.net); PPP Password: (password from Provider); PPPoE Service Name: Speedy, Next

7. Cheklist Enable WAN Service, Service Name: Speedy, Next

8. WAN Setup - Summary, Save

9. Save/Reboot
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj6b90B-5YuMei3kIWodnQZkRoOv96lqfglymK4wC8_8dP-m8K0N_DJc3UPBnqVgY-Qv4tlCh_PuP0H7eFdq4sI6xixg8VNgfkDbld_e1PdrA3M9r3dvSsMqAyDCIDYzL6Vt6oCO1TC5z-n/s320/image002.jpg
—
Adsl Modem Billion

1.Login To : http ://192.168.1.254

2.User name = admin
Password = password
Click -> OK

3.Click : Quick Start

4.Edit Connection :
Encapsulation = PPPoE LLC
Bridge = Enabled
Setting VPI = 8 dan VCI = 81 , and Than
Static IP Setting
IP Address = 0.0.0.0
subnet mask = 0.0.0.0
Gateway = 0.0.0.0

5.Click : - Submit
- SAVE CONFIG

6.Click : Submit

7.Wait Till process Configuration done !

8.Configuration Done !

—
Modem Prolink

1.Login To -> http :// 10.0.0.2
User Name : admin
Password : password
Click . . . . OK

2.Chose Configurasi WAN :

3.Select Adapter : Pilih Pvc3 (Indonesia)

4.Edit Field :
Bridge = Enable
Encapsulation = 1483 Bridge IP LLC
ATM VPI = 8
ATM VCI = 81
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjQVrUz1RBCKft074d_3U3Y1jUlZgA-PUleyepLXu5c39c9jUKy6Kudnp_vYpTStBMSmXUvWmLefELbqcWNeX6oIIhP_FTm2LdXQHcn4yySBoMgb5UVFFhdEjmD_mKUCs2b2oZBeSTYhOaO/s320/image002.jpg

5.Static IP Setting : “ just blank “
IP Address = just empty
Subnet Mask = just empty
Gateway = just empty
User Name = username@telkom.com . . . . . . ( optional ) **
Password = xxxxxxxx . . . . . . . . . . . . . . . . .( optional ) **

**If you choose to put username & password there just double clik explorer
**If you not choose to put username & password there you have to create new connection at Network Connection

6.Create New Connection (Bridge) See here..>>

7.Than Next :

* Click Submit

* Click Save Configuration

Next : Save Reboot ….
—
Adsl Modem D-Link

D-Link

DSL-302T

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Click Setup
2. Click Connection
3. Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
4. Click Tools
5. Click System Commands, Save All, Restart
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhdhSzUsLj6f2nzaCaDcMiEtKE_G5tYn3XSTleubY-DtFZS1T2ZosBEzHuhkM_AzsU7kV6tg5XFW3584neiq9sPFx7GxN2Gaef926qL5venvo8tAgD_8abqNf9Ku4MpS8-SnO91k8dAG_d4/s400/image001.png
Setting PPPoE/Router
1. Click Setup
2. Click Connection
3. Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: (nmrspeedy@telkom.net); Password: (password from provider); VPI=8; VCI=81, Apply
4. Click Tools
5. Click System Commands. Save All, Restart
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhSzN3Bz-gRqiA0Ir0fLrxGwK9O7fkdRyJkRyrJ81p9E1WawwZVMfUoJgMdPkNLyoHCR2VBAtOCyJ_fJnVy_gNxRuKDZveCOBCIfW01uVKXSDFi5MaqhtgzPBPBb4q6aqmXRABZy7stajJ2/s400/image001.png
—
adsl Modem Repotec

1. open Internet
Explorer ketik : http://192.168.1.1

2. Username : admin & Password : epicrouter

3. Click : OK

class=”MsoNormal”>Click WAN

1. Pic Adapter : Pvc0

2. Click Submit

1.Virtual Circuit = Enabled

2. Bridge & IGMP = Disabled

3a.
Each region was different from another region and for Bandung vpi :8 , vci : 81

3c.Service Category = UBR without PCR

3d.Protocol/Conection type = PPPoE

3e.Encapsulation = LLC/Snap-Bridging

4. Put Username & Password from your provider

5. and Than click Submit.

6. click Save Configuration

(wait till Saving configuration done.)

7. put DNS : 202.134.0.155 & 202.134.2.5
—
Adsl Modem Dareglobal

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Click Advanced Setup
2. Click WAN
3. Find VPI/VCI: 8/81, Click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup - Summary, Save
8. Save/Reboot

Setting PPPoE
1. Click Advanced Setup
2. Click WAN
3. Cari VPI/VCI: 8/81, Click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Put your PPP Username: (Nomorspeedy@telkom.net); PPP Password: (Password from provider); PPPoE Service Name: Speedy, Next
7. Centang Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup - Summary, Save
9. Save/Reboot
—
Adsl Modem TP-Link

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. click Advanced Setup
2. click WAN
3. Find VPI/VCI: 8/81, click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup - Summary, Save
8. Save/Reboot
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh5ZXLWUTPwijRujFweoKSLv4hnV4ArfAL7ylYxTiWC1BYlp5CJ3nFZxZIRJZHTKmQ6I__2TEjuY1bQMibRZVGslKdYpDVS9mZvyTGg7ew3gDGNqt8EocVTAbtuL94zX7RONJHoRxDaMEfB/s320/image002.jpg

Setting PPPoE
1. click Advanced Setup
2. click WAN
3. find VPI/VCI: 8/81, click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Put your PPP Username: (nmrspeedy@telkom.net); PPP Password: (password from provider); PPPoE Service Name: Speedy, Next
7. Cheklist Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup - Summary, Save
9. Save/Reboot
—
Adsl Modem Shiro

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Click Advanced
2. Click WAN
3. Click New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
5. Save Settings
6. Restart Router

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjUWgi1xRCZOLTvtqWtTri3-Gz4GkaTqumC1EpitZZikxDv28QrYkyJ9dVVu8z7hueRptElqWW5WRxyMjETcli-uO8MDDF8yynrkHPxJrk3NchpA6WHzzzbyWgignwXiICTEbkz3pXYzbwL/s400/image002.jpg
Setting PPPoE
1. Pilih Advanced
2. Pilih WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: (nmrspeedy@telkom.net), Password: (password from provider), VPI: 8, VCI: 81, and Submit
5. Save Settings
6. Restart Router
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiFQAYs4Vwh6Vm_ubLwIwUDJ63cqgrcQx0yzEaLGPd5ILR7Gb4xWVLfldKKWp35GzV23S-h8ob0pHH9R1aIgFbAzoW551zb-dvDS-OrdOLqqIkxLRv1xS6_ly4yL_qzmhvJNFf5Nz705yLB/s1600-h/image001.png
—
Adsl Modem Shiro

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Cara melakukan setting di komputer untuk akses ke modem Articonet.
Untuk setting di komputer dilakukan sesuai dengan operating system yang dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows XP.
Lakukan network setting di PC (komputer) sbb :

a. Start – Control Panel – Network Connection
b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties
c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General.
d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK.

Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE)
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password : admin/admin
Setelah masuk ke menu setting lakukan langkah berikut :
Masuk ke menu “Advanced Setup” kemudian pilih “WAN” dan klik tombol “Edit” disebelah kanan tabel WAN Masukkan nilai PVC Configuration : (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = PPPoE
Encapsulation = LLC, kemudian klik tombol Next
Masukkan username dan password Speedy, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan “Enable WAN Service”, kemudian klik Next dan klik tombol Save
Setting PPPoE untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge.
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password : admin/admin
Setelah masuk ke menu setting lakukan langkah berikut :
Masuk ke menu “Advanced Setup” kemudian pilih “WAN” dan klik tombol “Edit” Masukkan nilai PVC Configuration : (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = Bridging
Encapsulation = LLC, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan “Enable Bridge Service”, kemudian klik Next dan klik tombol Save
Setting Bridge untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer.

Panduan instalasi Dial Up koneksi ADSL menggunakan Windows 2000:
1. Klik Start, klik Setting,klik Control Panel,
2. Klik Network and Dial Up Connections.
3. Klik Make New Connection, klik Next,
4. Klik Dial Up to the Internet
5. Klik I want to setup my internet manually, klik Next
6. Klik I connect through a phone line and a modem klik Next
7. Pilih dan klik modem ADSL yang sesuai
8. Isi username : 15xxxxxxxxxx@telkom.net
9. Password : xxxxxxxx
10. Klik OK dan Lanjutkan sesuai perintah yang muncul
11. Klik Finish

Panduan installasi Dial Up koneksi ADSL menggunakan Windows Xp:
1. Klik Start, Control Panel, Network Connections.
2. Klik New Connection Wizard.
3. Klik Connect to the Internet, klik Next.
4. Klik Setup my connection manually, klik Next
5. Klik Connect using a broadband connection that requires a user name and password, klik Next.
6. Isi ISP Name “TelkomSpeedy”, klik Next
7. Isi username : 15xxxxxxxxxx@telkom.net dan Password : *******
8. Confirm password : xxxxxxxx
9. Kemudian beri tanda v(centang) pada pilihan “Add a shortcut to the desktop screen”
10. Klik Finish

Error_koneksi_dial_Speedy

Error 678 Dial Broadband

remplaza_fecha(’5:53 AM’);

Error 678

Follow this steps :

Step 1: Turn On Modem ADSL

1.See adsl modem ON (Not blinking) before you dial

Step 2 : Reset winsock TCP/IP

1.Click start -> Click Run -> tipe netsh winsock reset and than enter

2.When command prompt window up again, restart computer

3.Try ping to Modem and Try connection diaol again.

Step 3: setting Modem adsl

1.Login to Gateway Modem via Browser exp: 192.168.1.1

Pic : VPI : 8 / VCI : 81 (for Bandung)

- Encapsulation : LLC

- Type Koneksi : Bridge

2 . If Not Work try to Reset you Modem and setting adsl Ruter again.

Error 769 Dial Broadband

remplaza_fecha(’5:56 AM’);

ERROR 769

Chek LAN computer:

1. Click start menu

2. Click Control Panel

3. Click Network Connection

Click Local Area Connection
- -> Click Right and than ENABLE.

Error 619/691 Dial Broadband

remplaza_fecha(’8:41 AM’);

ERROR 619/691

Try Create New Connection at computer :

1.Click start menu

2.Click Control Panel

3.Click Network Connection

4. Click ‘create a new connectio ->NEXT

5. Clcik connect to the internet àNEXT

6.Click setup my connection manually ->NEXT

7. Click connect using a broadband connection that requires a username and password -> NEXT

8.ISP Name:speedy -> NEXT

9.Username:1311XXXXXX@telkom.net

Password:XXXXXXX -> NEXT

10.Check list Add a shortcut to this connection to my dekstop.

11.Click Finish.

12.Click icon speedy at dekstop13.Click connect

Error 629 - The port was disconnected by the local machine

remplaza_fecha(’3:06 PM’);

This can be resolved by following these steps:

· Restart your computer and wait until all applications have completely loaded before trying to reconnect.
· If your problem has still not been resolved uninstall and reinstall your Broadband modem. For information on how to do this please refer to the ADSL modem setup instructions or the installation cd that was provided with your modem

Error 631 -The port was disconnected by the user

remplaza_fecha(’3:09 PM’);

Usually this is a one-off glitch which happens when the Connection Progress is interrupted by the user or another program on the PC. In order to resolve this:

· Restart your computer and wait until all applications have completely loaded before trying to reconnect.

Error 633 -The port is already in use / not configured for Remote Access Dialout

remplaza_fecha(’3:11 PM’);

This error can be best remedied by: · A restart of your computer tends to resolve 50% of cases with this error message · Disable any Firewall Software and try to connect again… · Try uninstalling and reinstalling the Modem. For information on how to do this please refer to the ADSL modem setup instructions or the installation cd that was provided with your modem.

Error 645 - Internal Authentication Error

remplaza_fecha(’3:12 PM’);

Error 645 - Internal Authentication Error

This problem tends to occur when using Windows 98 or Windows ME. This can be resolved by following these steps:

· Try uninstalling and reinstalling the Modem. For information on how to do this please refer to the ADSL modem setup instructions or the installation cd that was provided with your modem.

· Windows 95/98 - This error can occur if the ‘Require encrypted password’ option is enabled on the ‘Server Types’ tab in the connection’s properties, or an incorrect user name or password have been entered. See MS KB Article Q199780

· All versions of Windows - This error can occur if you are attempting to connect to a Windows 2000 domain that has had a RRAS (Routing and Remote Access Services) server log on without administrative privileges. See MS KB Article 227747

Error 651 - Your modem has reported an error

remplaza_fecha(’3:15 PM’);

This error usually occurs with Windows 2000 when the Internet connection has become corrupted. This can be resolved by following these steps:

· Try uninstalling and reinstalling the Modem. For information on how to do this please refer to the ADSL modem setup instructions or the installation cd that was provided with your modem.

Error 680 - No dial tone

remplaza_fecha(’3:19 PM’);

This error usually means there is a problem receiving the Broadband signal at your modem. An error 680 / 619 would usually also mean you do not have a solid green ADSL light on the modem. This can be resolved by following these steps:

Ensure you have checked the following:
· Does your telephone Work? (if not you may have a fault with your telephone line)
· Is the cable from the modem to the filter secure at each end?
· Are you using a home-made extension line? Broadband requires a solid copper (round) extension.

Error 680 and both modem lights are solid green
If the modem installation seems successful and you have two solid green lights on your modem but are still receiving the error message- 680: No dial tone, then:
· If you have an internal 56k modem please disable the modem as follows
o Right click on the My Computer Icon on your desktop and then select Properties
o If you have a Device Manager tab along the top select this, otherwise select the Hardware tab along the top and then click on the Device Manager button
o In the Device Manager click on the + sign on the Modem selection and then…
o Identify and right click your modem icon and select Disable / Properties and then Disable in this Hardware Profile
o After you have completed this, close down the Device Manager and then restart your computer and try to reconnect to the Broadband connection.

Error 797 - The connection failed because the modem or other connecting device failed

remplaza_fecha(’3:21 PM’);

This can be resolved by following these steps: · Restart your computer and wait until all applications have completely loaded before trying to reconnect. If your problem has still not been resolved uninstall and reinstall your Broadband modem. For information on how to do this please refer to the ADSL modem setup instructions or the installation cd that was provided with your modem

PC / Computer / Laptop Harus selalu di update antivirsu dan di scan • Cek computer from virus and spyware (with installing at computer).• example Antivirus software :– Avg free antivirus : http://free.grisoft.com– Avira antivirus : http://www.avira.com– Avast Antivirus : http://www.avast.com• Example AntiSpyware Software :– Microsoft Antispyware : http://www.Microsoft.com/OneCare– Spyware Doctor : http://www.pctools.com/spyware-doctor– Ad-aware : http://www.lavasoftusa.com• Diatas adalah beberapa Link antivirus yang bisa anda gunakan

READMORE

0 komentar |

TUTORIAL ADSL(SPEEDY)

m miftahul huda

Pasang Speedy

untuk pemasangan speedy Perangkat yang diperlukan pelanggan :

1. Modem ADSL

2. Splitter / Micro filter

3. PC(Personal Computer) atau Notebook

. 500MHz processor, 128 MB RAM dan dilengkapi aplikasi multimedia dan ethernet card/ metwork interface card (NIC).

. Sistem operasi Windows ME/2000/XP, Linux, Mac OS, Solaris.

4. Aksesoris LAN, seperti hub, switch, router bagi pelanggan korporasi bila akan

digunakan

untuk jaringan komputer lokal.

Setting_Modem_Speedy

Adsl Modem SMC

Default IP: 192.168.2.1

Default password: smcadmin

Setting Bridge

1. Click WAN

2. Clik ATM PVC

3. Click VC1

4. Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10

1. Click WAN

2. Click ATM PVC

3. Click VC1

5. Save Settings

—-
Adsl Modem ZyXeL

P-660R

Default IP: 192.168.1.1
Default username : admin
Default password : 1234

Setting Bridge
1. choose Network
2. choose WAN
3. Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
4. choose Maintenance
5. choose Tools
6. Restart

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Aztech

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Click Advanced
2. Click WAN
3. Click New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
5. Save Settings
6. Restart Router

AR1031

Default ip: 192.168.1.1

Default username : admin

Default password : admin

Setting Bridge

1. Click Advanced Setup

2. Click WAN

3. Click Edit

4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next

5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next

6. Cheklist Enable Bridge Service, Service Name: Speedy, Next

7. WAN Setup - Summary, Save

1. Click Advanced Setup

2. Click WAN

3. Click Edit

4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next

5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next

6. Put your PPP Username: (nmrspeedy@telkom.net); PPP Password: (password from Provider); PPPoE Service Name: Speedy, Next

7. Cheklist Enable WAN Service, Service Name: Speedy, Next

8. WAN Setup - Summary, Save

1.Login To : http ://192.168.1.254

2.User name = admin
Password = password
Click -> OK

3.Click : Quick Start

4.Edit Connection :
Encapsulation = PPPoE LLC
Bridge = Enabled
Setting VPI = 8 dan VCI = 81 , and Than
Static IP Setting
IP Address = 0.0.0.0
subnet mask = 0.0.0.0
Gateway = 0.0.0.0

5.Click : - Submit
- SAVE CONFIG

6.Click : Submit

7.Wait Till process Configuration done !

8.Configuration Done !

—
Modem Prolink

1.Login To -> http :// 10.0.0.2
User Name : admin
Password : password
Click . . . . OK

2.Chose Configurasi WAN :

3.Select Adapter : Pilih Pvc3 (Indonesia)

**If you choose to put username & password there just double clik explorer
**If you not choose to put username & password there you have to create new connection at Network Connection

6.Create New Connection (Bridge) See here..>>

7.Than Next :

* Click Submit

* Click Save Configuration

Next : Save Reboot ….
—
Adsl Modem D-Link

D-Link

DSL-302T

Default IP: 192.168.1.1
Default username : admin
Default password : admin

1. open Internet
Explorer ketik : http://192.168.1.1

2. Username : admin & Password : epicrouter

3. Click : OK

class=”MsoNormal”>Click WAN

1. Pic Adapter : Pvc0

2. Click Submit

1.Virtual Circuit = Enabled

2. Bridge & IGMP = Disabled

3a.
Each region was different from another region and for Bandung vpi :8 , vci : 81

3c.Service Category = UBR without PCR

3d.Protocol/Conection type = PPPoE

3e.Encapsulation = LLC/Snap-Bridging

4. Put Username & Password from your provider

5. and Than click Submit.

6. click Save Configuration

(wait till Saving configuration done.)

7. put DNS : 202.134.0.155 & 202.134.2.5
—
Adsl Modem Dareglobal

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Click Advanced
2. Click WAN
3. Click New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
5. Save Settings
6. Restart Router

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer.

Error_koneksi_dial_Speedy

Error 678 Dial Broadband

remplaza_fecha(’5:53 AM’);

Error 678

Follow this steps :

Step 1: Turn On Modem ADSL

1.See adsl modem ON (Not blinking) before you dial

Step 2 : Reset winsock TCP/IP

1.Click start -> Click Run -> tipe netsh winsock reset and than enter

2.When command prompt window up again, restart computer

3.Try ping to Modem and Try connection diaol again.

Step 3: setting Modem adsl

1.Login to Gateway Modem via Browser exp: 192.168.1.1

Pic : VPI : 8 / VCI : 81 (for Bandung)

- Encapsulation : LLC

- Type Koneksi : Bridge

2 . If Not Work try to Reset you Modem and setting adsl Ruter again.

Error 769 Dial Broadband

remplaza_fecha(’5:56 AM’);

ERROR 769

Chek LAN computer:

1. Click start menu

2. Click Control Panel

3. Click Network Connection

Click Local Area Connection
- -> Click Right and than ENABLE.

Error 619/691 Dial Broadband

remplaza_fecha(’8:41 AM’);

ERROR 619/691

Try Create New Connection at computer :

1.Click start menu

2.Click Control Panel

3.Click Network Connection

4. Click ‘create a new connectio ->NEXT

5. Clcik connect to the internet àNEXT

6.Click setup my connection manually ->NEXT

7. Click connect using a broadband connection that requires a username and password -> NEXT

8.ISP Name:speedy -> NEXT

9.Username:1311XXXXXX@telkom.net

Password:XXXXXXX -> NEXT

10.Check list Add a shortcut to this connection to my dekstop.

11.Click Finish.

12.Click icon speedy at dekstop13.Click connect

Error 629 - The port was disconnected by the local machine

remplaza_fecha(’3:06 PM’);

This can be resolved by following these steps:

Error 631 -The port was disconnected by the user

remplaza_fecha(’3:09 PM’);

Usually this is a one-off glitch which happens when the Connection Progress is interrupted by the user or another program on the PC. In order to resolve this:

· Restart your computer and wait until all applications have completely loaded before trying to reconnect.

Error 633 -The port is already in use / not configured for Remote Access Dialout

remplaza_fecha(’3:11 PM’);

Error 645 - Internal Authentication Error

remplaza_fecha(’3:12 PM’);

Error 645 - Internal Authentication Error

This problem tends to occur when using Windows 98 or Windows ME. This can be resolved by following these steps:

· Try uninstalling and reinstalling the Modem. For information on how to do this please refer to the ADSL modem setup instructions or the installation cd that was provided with your modem.

Error 651 - Your modem has reported an error

remplaza_fecha(’3:15 PM’);

This error usually occurs with Windows 2000 when the Internet connection has become corrupted. This can be resolved by following these steps:

· Try uninstalling and reinstalling the Modem. For information on how to do this please refer to the ADSL modem setup instructions or the installation cd that was provided with your modem.

Error 680 - No dial tone

remplaza_fecha(’3:19 PM’);

Error 797 - The connection failed because the modem or other connecting device failed

remplaza_fecha(’3:21 PM’);

READMORE

0 komentar |

setting Modem ADSL Linksys AM300 Untuk Speedy

m miftahul huda

Tancep kabel LAN bawaan dari paket modem ke laptop ato PC, kalo ga mau pake LANnya bisa juga pake USB. Untuk USB harus install driver dulu dari CD paket modemnya.
Tunggu sebentar dan biarkan DHCP modem bekerja dan memberi alamat pada komputer anda. Kalau gagal dapat IP berarti DHCPnya ga jalan. Ganti dengan manual dan set IP komputer jadi 192.168.1.2. Netmasknya 255.255.255.0 sedangkan untuk gateway sementara boleh ga diisi.
Buka browser dan masukkan alamat http://192.168.1.1
Tunggu interface web untuk management modem terbuka lalu set seperti gambar berikut ini :

Menurut pengalaman saya antar modem-modem ADSL yang tersedia dipasaran biasanya settingannya ngikut default aja. Nah yang utama disetting oleh para teknisi tuh adalah Encapsulation, VPI dan VCI. Ni berbeda-beda di masing-masing coverage area Telkom Speedy. Untuk settingannya dimasing-masing daerah bisa di baca di bagian akhir artikel. Jadi settingan di sini khusus untuk modem ADSL Linksys AM300 dan wilayah saya itu di Yogyakarta.
Biarkan modem reboot sesaat lalu cek dibagian status. Kalau semua beres dan sudah UP berarti settingan anda sukses. Coba cek dibagian bawah yang ‘Internet’ apakah modem sudah mendapatkan IP dari Telkom atau belum. Kalau belum connect silahkan klik button connect.

Klo mau DHCP bisa diset pada bagian bawah basic-setup bisa di atur alamat DHCP servernya. Setelah menggunakan DHCP anda tidak perlu lagi mengeset IP secara manual di komputer anda. Ganti setting ke Automatic dan biarkan modem memberikan anda IP secara otomatis.
> href="http://antodoroki.files.wordpress.com/2008/03/basic-setup-dhcp.png">

Ni Referensi dari blog Bung Harry Chan Putra (Salam bang…) untuk settingan Encapsulasi, VCI dan VPI untuk Telkom Speedy di berbagai daerah di Indonesia
A. Jakarta
1. Untuk DSLAM buatan Alcatel-Lucent (France)
Encapsulation = PPPoA • VPI = 8 • VCI = 35
Sumber Info: [1]

2. Untuk DSLAM buatan Huawei Technologies Co Ltd (China)
Encapsulation = PPPoE • VPI = 0 • VCI = 35
Sumber Info: [1]

3. Untuk DSLAM buatan Siemens AktienGesellschaft (Germany)
Encapsulation = PPPoA • VPI = 1 • VCI = 33
Sumber Info: [1]

B. Sumatra, Jawa Barat, Jawa Tengah, Jawa Timur, Bali, Kalimantan, Sulawesi
1. Untuk DSLAM buatan ZTE (ZhongXing Telecommunication Equipment Co Ltd)(China)
Encapsulation = PPPoE • VPI = 8 • VCI = 81
Sumber Info: [1]

2. Untuk DSLAM buatan Huawei Technologies Co Ltd (China)
Encapsulation = PPPoE • VPI = 0 • VCI = 35
Sumber Info: [1]

READMORE

1 komentar |

Error 678 Dial Broadband

Error 769 Dial Broadband

Error 619/691 Dial Broadband

Error 629 - The port was disconnected by the local machine

Error 631 -The port was disconnected by the user

Error 633 -The port is already in use / not configured for Remote Access Dialout

Error 645 - Internal Authentication Error

Error 645 - Internal Authentication Error

Error 651 - Your modem has reported an error

Error 680 - No dial tone

Error 797 - The connection failed because the modem or other connecting device failed

Error 678 Dial Broadband

Error 769 Dial Broadband

Error 619/691 Dial Broadband

Error 629 - The port was disconnected by the local machine

Error 631 -The port was disconnected by the user

Error 633 -The port is already in use / not configured for Remote Access Dialout

Error 645 - Internal Authentication Error

Error 645 - Internal Authentication Error

Error 651 - Your modem has reported an error

Error 680 - No dial tone

Error 797 - The connection failed because the modem or other connecting device failed

visitor blogger

my profil

TKJ 2008-2011

visitor

iklan

iklan

Arsip Blog

backling boomber